Thursday, February 3, 2011
BMW HP2
HP2 Sport is based on the R1200S, but it is out and out designed for sports riders who are looking for a machine that has the power, as well as perseverance. HP2 Sport keeps some of the concepts that BMW motorcycles have become known as the front suspension BMW Motorrad EVO Telelever and Paralever rear suspension. Other components are developed or adapted for use in a motorcycle.
BMW HP2
HP2 Sport is powered by twin cylinder Boxer engine, which has a capacity of 1170 cc. engine cylinder heads were completely redesigned to allow the motor to run as high as 9500 rpm. The engine has 101 mm bore and stroke of 73 mm produces a maximum of 130 hp at 8,750 rpm and 85 Nm of torque at 6,000 rpm. / Min, bike has a close ratio six speed transmission, first gear and the second is a higher proportion. This building installation steps closer to each other and results in less speed continues to decrease through the gears.
BMW HP2
sprocket has a wizard, which allows the pilot to organize without the clutch. Works with the resumption of a lever device is activated. If it detects the activation of the shift lever without clutch, electronically reduces engine power, which puts the engine under low load and allows you to move without the clutch. If a rider uses the clutch, the system becomes inactive.
Grab The Bookmarketer For Your Site
0 Comments:
